ANSI/AWWA D100-11

The purpose of this standard is to provide guidance to facilitate the design, manufacture, and procurement of welded carbon steel tanks for the storage of water. This standard does not cover all details of design and construction because of the large variety of sizes and shapes of tanks.

Where details for any specific design are not given, it is intended that the constructor, subject to the approval of the purchaser, shall provide details that are designed and constructed to be adequate and as safe as those that would otherwise be provided under this standard.

This standard does not cover concrete steel composite tank construction. Section 1 covers general topics such as scope, definitions, guarantee, drawings to be furnished, and references. Section 2 discusses material specifications. Section 3 details general design. Section 4 addresses the sizing and design of elevated tanks. Accessories for elevated tanks are discussed in Section 5. Section 6 covers sizing of ground-supported standpipes and reservoirs. Accessories for ground-supported standpipes and reservoirs are detailed in Section 7. Sections 8 through 15 include welding, shop fabrication, erection, inspection and testing, foundation design, seismic design of water storage tanks, and alternative design basis for standpipes and reservoirs.

This product references:ANSI/ASME B16.5-2009 - Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard
ASME BPVC-V-2010 - 2010 ASME Boiler and Pressure Vessel Code (BPVC), Section V: Nondestructive Examination, Includes 2011 Addenda Reprint
ASME BPVC-VIII-1-2010 - 2010 ASME Boiler and Pressure Vessel Code (BPVC), Section VIII, Division 1: Rules for Construction of Pressure Vessels, Includes 2011 Addenda Reprint
ASME BPVC-IX-2010 - 2010 ASME Boiler and Pressure Vessel Code (BPVC), Section IX: Welding and Brazing Qualifications, Includes 2011 Addenda Reprint
ASNT SNT-TC-1A-2006 - Recommended Practice No. SNT-TC-1A - Non-Destructive Testing, 2006 Edition (Includes copy of CP-105-2006)
ASTM A6/A6M-11 - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
ASTM A20/A20M-10 - Standard Specification for General Requirements for Steel Plates for Pressure Vessels
ASTM A27/A27M-10 - Standard Specification for Steel Castings, Carbon, for General Application
ASTM A36/A36M-08 - Standard Specification for Carbon Structural Steel
ASTM A53/A53M-10 - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A105/A105M-10a - Standard Specification for Carbon Steel Forgings for Piping Applications
ASTM A106/A106M-10 - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
ASTM A108-07 - Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A131/A131M-08 - Standard Specification for Structural Steel for Ships
ASTM A139/A139M-04(2010) - Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
ASTM A588/A588M-10 - Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
ASTM A592/A592M-10 - Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
ASTM A633/A633M-01(2011) - Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
ASTM A662/A662M-03(2007) - Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
ASTM A668/A668M-04(2009) - Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
ASTM A678/A678M-05(2009) - Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates (Withdrawn 2010)
ASTM A992/A992M-11 - Standard Specification for Structural Steel Shapes
ASTM A1011/A1011M-10 - Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM D1751-04(2008) - Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
ASTM F1554-07a - Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
CSA G40.20-04/G40.21-04 (R2009) - General Requirements for Rolled or Welded Structural Quality Steel/Structural Quality Steel
AISC 325-05 - Steel Construction Manual, Thirteenth Edition
ASTM A181/A181M-06 - Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
ASTM A193/A193M-11 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A283/A283M-03(2007) - Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
ASTM A307-10 - Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
ASTM A325-10 - Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
ASTM A333/A333M-11 - Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
ASTM A350/A350M-10 - Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A370-11 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A435/A435M-90(2007) - Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
ASTM A500/A500M-10a - Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ASTM A501-07 - Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
ASTM A516/A516M-10 - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A517/A517M-10 - Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
ASTM A524-96(2005) - Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
ASTM A537/A537M-08 - Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
ASTM A568/A568M-11a - Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
ASTM A573/A573M-05(2009) - Standard Specification for Structural Carbon Steel Plates of Improved Toughness
ACI 301-05 - Specifications for Structural Concrete for Buildings
ANSI/AWS A2.4:2007 - Standard Symbols for Welding, Brazing, Nondestructive Examination
ANSI/AWS A3.0M/A3.0:2010 - Standard Welding Terms and Definitions - Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal Spraying
ANSI/AWS A5.1/A5.1M:2004 - Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
ANSI/AWS A5.5/A5.5M:2006 - Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding
ANSI/AWS B2.1/B2.1M:2009 - Specification for Welding Procedure and Performance Qualification
ANSI/AWS D1.1/D1.1M:2008 - Structural Welding Code - Steel, Second Printing, Includes Errata (2009)
AWWA C652-02 - Disinfection of Water-Storage Facilities
ANSI/AWWA D102-06 - Coating Steel Water-Storage Tanks
ANSI/AWWA D108-10 - Aluminum Dome Roofs For Water Storage Facilities
ANSI/API Spec 5L - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
API Std 650 - Welded Tanks for Oil Storage, 11th Edition, Includes Addendum 1 (2008), Addendum 2 (2009), Addendum 3 (2011), Errata (October 2011)
ASCE 7-05 - Minimum Design Loads for Buildings and Other Structures
This product is related to: API Std 620 - Design and Construction of Large, Welded, Low-Pressure Storage Tanks, Eleventh Edition, Includes Addendum 1 (2009), Addendum 2 (2010), and Addendum 3 (2012)
AWWA M42 - M42: Steel Water-Storage Tanks
ANSI/NCSL Z540.3-2006 - Requirements for the Calibration of Measuring and Test Equipment
ANSI/AWWA D103-09 - Factory-Coated Bolted Steel Tanks for Water Storage
ANSI/AWWA D107-10 - Composite Elevated Tanks for Water Storage
ANSI/AWWA D108-10 - Aluminum Dome Roofs For Water Storage Facilities
This product replaces:ANSI/AWWA D100-05 - Welded Steel Tanks for Water Storage, Includes Errata

Browse Product Family:

ANSI/AWWA D100-11
ANSI/AWWA D100-05
ANSI/AWWA D100-96
AWS D5.2-84