ANSI/ASHRAE 118.2-2006

This test procedure is a revision of ANSI/ASHRAE Standard 118.2-1993, Method of Testing for Rating Residential Water Heaters.

Various changes were made to improve the clarity and consistency of the standard. Some material was moved to the appendices. Other changes were to require one pre-draw, to require a 24-hour soak-in period before the test, and to handle recovery periods that are preceded by multiple draws. The tolerances allowed in some measurements were reduced, and references to other standards were updated. The scope was changed to coordinate with ANSI/ASHRAE Standard 118.1-2003, Method of Testing for Rating Commercial Gas, Electric, and Oil Service Water Heating Equipment.

Units: Dual



Product Code(s): 86359,D-86359

This product replaces:ASHRAE 118.2-1993 - Standard 118.2-1993 -- Method of Testing for Rating Residential Water Heaters

Browse Product Family:

ANSI/ASHRAE 118.2-2006
ASHRAE 118.2-1993

People Who Bought This Also Bought:
ANSI/ASHRAE 118.1-2003- Electric, and Oil Service Water Heating Equipment (ANSI Approved)ASHRAE 41.9-2000 (RA 2006)- Standard 41.9-2000 (RA 2006) -- Calorimeter Test Methods for Mass Flow Measurements of Volatile Refrigerants (ANSI approved)ANSI/ASHRAE 127-2007- Standard 127-2007 -- Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners (ANSI Approved)ANSI/ASHRAE 41.7-1984 (RA 2006)- Standard 41.7-1984 (RA 2006) -- Method of Test for Measurement of Flow of Gas (ANSI approved)ANSI/ASHRAE 41.10-2008- Standard 41.10-2008 -- Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Flowmeters (ANSI/ASHRAE Approved)ANSI/ASHRAE 18-2008- Standard 18-2008 -- Methods of Testing for Rating Drinking-Water Coolers with Self-Contained Mechanical Refrigeration (ANSI/ASHRAE Approved)ANSI/ASHRAE 28-1996- Standard 28-1996 -- Method of Testing Flow Capacity of Refrigerant Capillary Tubes (ANSI approved)ASHRAE 32.2-2003 (RA 2007)- Standard 32.2-2003 (RA 2007) -- Methods of Testing for Rating Pre-Mix and Post-Mix Beverage Dispensing Equipment (ANSI Approved)ANSI/ASHRAE 41.1-1986 (RA 2006)- Standard 41.1-1986 (RA 2006) -- Standard Method for Temperature Measurement (ANSI Approved)ANSI/ASHRAE/AMCA 51-2007- Standard 51-2007 -- Laboratory Methods of Testing Fans for Aerodynamic Performance Rating (ANSI/ASHRAE Approved) (ANSI/AMCA Standard 210-07)