ANSI/ASHRAE 170-2008
ANSI/ASHRAE/ASHE Standard 170, Ventilation of Health Care Facilities, is one of a family of documents that offers guidance, regulation, and mandates to designers of health care facilities. It is first and foremost a mandatory minimum requirement and, as such, may not offer the state-of-theart best practice of health care ventilation design. Other publications, such as the ASHRAE HVAC Design Manual for Hospitals and Clinics, may provide more depth and detail for the designer. In addition, the health care designer must refer to any design requirements from the appropriate jurisdiction that has authority. Many jurisdictions use or refer to Guidelines for Design and Construction of Hospitals and Health Care Facilities, published by the American Institute of Architects (AIA). Where practical, the committee was cognizant of these other documents in the development of this standard.Ventilation design for health care spaces is a combination of tasks that leads to a set of documents used in construction.Units: Dual
Product Code(s): D-86501,86501
- This product references:ANSI/ASHRAE 154-2003 - Standard 154-2003 -- Ventilation for Commercial Cooking Operations (ANSI Approved)
NFPA (Fire) 90A - Installation of Air Conditioning and Ventilating Systems, 2007 Edition
NFPA (Fire) 96 - Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations, 2008 Edition
NFPA (Fire) 99 - Health Care Facilities, 2005 edition
This product is related to: HVAC Design Manual for Hospitals and Clinics, 2nd ed.
HVAC Design Manual for Hospitals and Clinics - Standard 170-2008 -- Ventilation of Health Care Facilities (ANSI/ASHRAE/ASHE Approved)
ANSI/ASHRAE 170-2008 - Standard 170-2008 -- Ventilation of Health Care Facilities (ANSI/ASHRAE/ASHE Approved)
ANSI/ASHRAE 170-2008 Addenda k, n, v
ASHRAE IC 170-2008-3
ASHRAE IC 170-2008-4
ANSI/ASHRAE 170-2008 Addenda j, q, and t
ANSI/ASHRAE 170-2008 Addendum p
ANSI/ASHRAE IC 170-2008-2
ANSI/ASHRAE 170-2008 Addendum m
ANSI/ASHRAE 170-2008 Addendum l
ANSI/ASHRAE 170-2008 Addendum h
ANSI/ASHRAE 170-2008 Errata (15-April-2011)
ANSI/ASHRAE 170-2008 Addendum g
ANSI/ASHRAE 170-2008 Addendum e
ANSI/ASHRAE 170-2008 Addendum f
ANSI/ASHRAE IC 170-2008-1
ANSI/ASHRAE 170-2008 Addendum d
ANSI/ASHRAE 170-2008 Addendum b
ANSI/ASHRAE 170-2008
People Who Bought This Also Bought:
ANSI/ASHRAE 62.1-2010- Standard 62.1-2010 -- Ventilation for Acceptable Indoor Air Quality (ANSI Approved)ANSI/ASHRAE 189.1-2009- Standard 189.1-2009 -- Standard for the Design of High-Performance Green Buildings (ANSI Approved; USGBC and IES Co-sponsored)ANSI/ASHRAE 90.1-2007 (I-P)- Standard 90.1-2007 (I-P Edition) -- Energy Standard for Buildings Except Low-Rise Residential Buildings (ANSI Approved; IES Co-sponsored)ASHRAE - HVAC Design Manual for Hospitals and ClinicsANSI/ASHRAE 105-2007- Standard Methods of Expressing, and Comparing Building Energy Performance (ANSI Approved)ANSI/ASHRAE 100-2006- Standard 100-2006 -- Energy Conservation in Existing Buildings (ANSI/IES Approved)ANSI/ASHRAE 180-2008- Standard 180-2008 -- Standard Practice for Inspection and Maintenance of Commercial Building HVAC Systems (ANSI/ASHRAE/ACCA Approved)ASHRAE - Advanced Energy Design Guide for Small Hospitals and Healthcare Facilities: 30% Energy SavingsANSI/ASHRAE/ACCA 183-2007- Standard 183-2007 -- Peak Cooling and Heating Load Calculations in Buildings Except Low-Rise Residential Buildings (ANSI/ACCA Approved)ASHRAE 62.1-2007- Standard 62.1-2007 -- Ventilation for Acceptable Indoor Air Quality (ANSI Approved)
View Contents (PDF)
