ANSI/AWWA C207-07

Steel Pipe Flanges for Waterworks Service, Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm) American Water Works Association / 01-Sep-2007 / 40 pages

More details

More info

This standard covers two types of slip-on flanges, ring type and hub type, that may be used interchangeably if the dimensions given in the standard are used. The standard also covers blind flanges. The flange types and the tables that describe them are: Ring-type, slip-on flanges (Tables 2, 5, and 6); Hub-type, slip-on flanges (Tables 3 and 4); and Blind flanges (Table 7). Unless otherwise specified by the purchaser, the manufacturer will select the type to be used. The purpose of this standard is to provide purchasers and manufacturers minimum material requirements and dimensions for a variety of steel flanges for attachment to steel water pipe and fittings.

Keywords: 43207

This product referenced by:ANSI/ASME B31.1-2007 - Steel Pipe Flanges for Waterworks Service, Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
ANSI/ASME B31.9-2008 - Steel Pipe Flanges for Waterworks Service, Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
ANSI/ASME B31.3-2006 - Steel Pipe Flanges for Waterworks Service, Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
ANSI/ASME B31.9-2011 - Steel Pipe Flanges for Waterworks Service, Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
This product replaces:ANSI/AWWA C207-01 - Steel Pipe Flanges for Waterworks Service - Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
Browse Product Family:

ANSI/AWWA C207-07
ANSI/AWWA C207-01
ANSI/AWWA C207-94

People Who Bought This Also Bought:
ANSI/AWWA C200-05- Steel Water Pipe - 6 in. (150 mm) and LargerANSI/AWWA C208-07- Dimensions for Fabricated Steel Water Pipe FittingsANSI/ASME B16.47-2006- Large Diameter Steel Flanges: NPS 26 Through NPS 60ANSI/ASME B16.9-2007- Factory-Made Wrought Buttwelding FittingsANSI/AWWA C504-06- Rubber-Sealed Butterfly ValvesAWWA M11- Steel Water Pipe: A Guide for Design and Installation (M11), Fourth EditionANSI/AWWA C214-07- Tape Coating Systems for the Exterior of Steel Water PipelinesAPI Spec 6A- Specification for Wellhead and Christmas Tree Equipment, Nineteenth Edition, Includes Erratas 1-5 (2009), Addendums 1, 2, 3, and 4 (2008) (PRINT EDITION INCLUDES BINDER)AWWA C210-07- Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water PipelinesANSI/ASME B16.5-2003- Pipe Flanges and Flanged Fittings: NPS 1/2 through 24